POE1A
poe1A

Passive PoE Injector

 


Passive POE (Power Over Ethernet) adapter, uses unused pairs of 100baseT network cable to transmit power to remote device.


Technical Data
Pinout: DC jack center positive, 2.1 mm pin. RJ45 pins 4,5 = positive, RJ45 pins 7,8 = negative.
Warnings: - To avoid ground loops, ground should be referenced on the receiving end only: use a 2 prong (non grounded) AC adapter.
- Passive POE does not comply with the IEEE 802.3af specification.